Stem cam or steel forging refers to the process of pressing, crushing and forging the heated metal, and the temperature of the heated metal reaches as high as 1000 degrees, so during the forging process, if the worker makes a mistake, the accident may be caused. If you work in the forging company, in order to prevent any accidents from occurring, you should be cautious. The following are some rules you should pay attention to:
 
1 In Wind Energy Parts companies, many devices need to be used, such as the heated device, the forging device and many accessory appliances. When you heat the metal with the heated device, a large amount of heat energy will radiate, which is harmful to the worker's health. Furthermore, when the metal is heated, much dust, smoke and slag will be produced. Therefore, the company should be built with ventilation and purification devices.
 
2 When you do the forging job, you need to hit the heated metal with the Pendulum Parts device, which may make you injured. Meanwhile, the noise and the vibration caused by the device will influence your nervous system, so you should adopt some preventive measures.
 
3 In the Forging parts supplier, many kinds of forging tools and accessory appliances are piled. The working environment is disordered. During the forging process, you need to look for tools. Then you may be injured in disordered environment. Meanwhile, when you forge metal, you need to use transportation device. If you are careless, you may also be injured, so you need to be alert when you are working.
 
4 You should know how to maintain the AL shell moulding device, and you should comply with its operating instruction. Furthermore, you can't operate the forging device and the heating device alone until you are trained to operate it neatly.
 
5 When you operate the device, you should wear the protective equipment, such as the special clothes, the gloves and the glasses.
 
6 When you and your coworkers work together, you should be concentrated and coordinate with one another.
 
7 Don't work in the dangerous places. When you cut the metal, don't stand on the place where metal chips will be flung out and hurt you. Don't clear away the waste on the anvil with your hands, and don't touch the Forging parts with your hand. Don't litter away the heated metal in case it will scald other people.
 
Forging companies are full of unsafe factors every where. You should protect yourself from being hurt. Fortunately, many forging suppliers recognize the importance of the working safety. They all adopt some good measures to protect the worker's safety.